EN
Wholesale 16pin V015 ELM327 V1.5 Car Code Reader Support Android IOS Obd2 Scanner Diagnostic Tool
This is a 16-pin V015 ELM327 V1. 5 OBD2 scan tool will work with code readers that can scan and clear trouble codes such as OBD2 scanner for cars. Connect to your Android or IOS device, and you will be able to read and clear fault codes using your cellphone or tablet. Easy operation and quick data transmission, it is the best choice of auto repair engineer
- Overview
- Related Products
Welcome to Comtech
Welcome to visit Shenzhen Comtech Electronics Co.,Ltd.
A Company You Can Trust
ShenZhen Comtech electronic co.,Ltd is one of the earliest suppliers of OBDII connectors and OBDII connecting lines for more than 15 years.
It has been focusing on the automotive connector industry and providing one-stop service from cable manufacturing, connector manufacturing, production, assembly and shipment
Products Description
015 ELM327 Blue-tooth 4.0 Scanner for Multi-brands CAN-BUS as same as ELM327 Blue-tooth 4.0. Supports All OBD2 Protocol works on IOS, Android, Symbian, Windows, used to read diagnostic trouble codes, both generic and manufacturer-specific, and display your meaning (over 3000 generic code definitions in the database).
Specification |
|
Communication |
Blue-tooth 4.0 |
Main Chip |
ST Chip |
Support Sytems |
IOS, Android, Symbian, Windows |
Hardware version |
V1.5 |
Support Protocols |
All OBDII Protocols |
Weight |
0.04KG |
Size |
5.5*4.5*2.4CM |
Working Voltage: |
9-16V |
Function
1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code
definitions in the database).
2: Clear trouble codes and turn off the MIL ("Check Engine" light)
3: Display current sensor data, including:
4: Engine RPM
5: Calculated Load Value
6: Coolant Temperature
7: Fuel System Status
8: Vehicle Speed
9: Short Term Fuel Trim
10: Long Term Fuel Trim
11: Intake Manifold Pressure
12: Timing Advance
13: Intake Air Temperature
14: Air Flow Rate
15: Absolute Throttle Position
16: Oxygen sensor voltages / associated short term fuel trims
17: Fuel System status
18: Fuel Pressure
19: Many others
definitions in the database).
2: Clear trouble codes and turn off the MIL ("Check Engine" light)
3: Display current sensor data, including:
4: Engine RPM
5: Calculated Load Value
6: Coolant Temperature
7: Fuel System Status
8: Vehicle Speed
9: Short Term Fuel Trim
10: Long Term Fuel Trim
11: Intake Manifold Pressure
12: Timing Advance
13: Intake Air Temperature
14: Air Flow Rate
15: Absolute Throttle Position
16: Oxygen sensor voltages / associated short term fuel trims
17: Fuel System status
18: Fuel Pressure
19: Many others
Our Products Advantage
1ï¼Accept Flexible Qty.
2ï¼Quick proofing confirmation3ï¼Normal use in harsh environment
Recommend Products
Company Profile
The Status Quo Of Our Company
1ï¼Start a business for over 15 years2ï¼Keep increasing rate of 50% for 8 sonsecutive years3ï¼Turnover rate of staff is less than 4%ï¼a proportional relationship between professionalism and working status.ï¼the number of professional experts exceeds 10ï¼.4ï¼Regular exhibitionï¼increasing the reputation and influence in automotive lighting industryã
How to Ensure the quality?
1.Product Acceptance Standard IPC/WHMA-A-620A
2.Perfect Quality Assurance System Process
3.Strong Quality Inspection Team: IQC, IPQC, OQC, QA
4.100% Electrical Testing, Conductivity Test, Visual Inspection
5.Product Pass Rate is more than 98%
Application
This Y cable is used to connect telematics, M2M devices, IoV (Internet of Vehicles) devices, fleet management devices, OBD2 GPS trackers, OBD2 CAN programming tools, ECU tuning tools or car performance tuning tools to vehicles' 16-Pin OBD2 female diagnostic ports.
Certifications
Why choose usï¼
1.Our company has passed ISO9001 quality assurance system certification and IATF international automobile quality management system certification.
2.We can make different overmolds for the ends of OBD2 OBDII female and male connectors. If you donât like the overmolds at the ends of OBD2 OBDII female and male connectors as shown in the pictures or you would like to have your own overmold with your companyâs logo or you have special application requirements, we can and we have the ability to make a new overmold for you with reasonable charge. Moreover, we can even make it for free as long as the order quantity is 5000 pcs or more.
About Us
Who we areï¼
ShenZhen Comtech electronic co..Ltd is a Chinese factory that manufactures OBDII cables for GPS companies all over the world. We also provide OEM packaging and can make OEM services according to customer requirements.
FAQ
Q1: What is the Minimum Order Quantity (MOQ) ?
A1 : Normally, MOQ is 100pcs, but special requirements can be accepted.
Q2: How much do I need to pay for your OEM service ?
A2: No need to pay extra cost for our OEM service if order quantity over 1000pcs.The OEM cost includes in the unit price.
Q3: What is the delivery time ? (How long do you need me to prepare my goods ?)
A3: 1-5 days for sample orders ,10-21 days for mass production orders
(based on different quantities, OEM, etc)
Q4: How will you deliver goods to me ?
A4: We ship by air and sea generally. In the mean time, we cooperate with international expresses such as DHL, UPS, FedEX, TNT to enable our customers to get their goods rapidly.
Q5: How long do I need to wait before my goods arrive ?
A5: 5-7 days for air transportation, 3-5 days foe international express.
Q6: How is your product quality ?
A6: Our raw materials are purchased from qualified suppliers. And it is UL, ROHS etc. Compliant. And we have a strong quality control team to guarantee our quality according to AQL standard.
Q7: What is your warranty ?
A7: Our warranty is 12 months after delivery, we pays high attention to after-sales service.
A1 : Normally, MOQ is 100pcs, but special requirements can be accepted.
Q2: How much do I need to pay for your OEM service ?
A2: No need to pay extra cost for our OEM service if order quantity over 1000pcs.The OEM cost includes in the unit price.
Q3: What is the delivery time ? (How long do you need me to prepare my goods ?)
A3: 1-5 days for sample orders ,10-21 days for mass production orders
(based on different quantities, OEM, etc)
Q4: How will you deliver goods to me ?
A4: We ship by air and sea generally. In the mean time, we cooperate with international expresses such as DHL, UPS, FedEX, TNT to enable our customers to get their goods rapidly.
Q5: How long do I need to wait before my goods arrive ?
A5: 5-7 days for air transportation, 3-5 days foe international express.
Q6: How is your product quality ?
A6: Our raw materials are purchased from qualified suppliers. And it is UL, ROHS etc. Compliant. And we have a strong quality control team to guarantee our quality according to AQL standard.
Q7: What is your warranty ?
A7: Our warranty is 12 months after delivery, we pays high attention to after-sales service.
